45
The compressor operates for too long.
The appliance has been switched off
for a while.
Too much or too hot food in the
appliance.
Doors opened too often or too long.
The appliance needs some time to
reach the preset temperature.
Remove any hot food.
Do not open the door too often/too
long.
Unsatisfactory cooling capacity.
The door was frequently opened.
The door is not properly closed.
Encrusted ice inside the appliance.
The current temperature setting is
too warm
Warm or hot food inside the
appliance.
The appliance is overfilled.
The door seals are damaged.
Select a different setting if necessary.
Check the door/door seals.
Defrost the appliance.
Strong formation of encrusted ice.
The door is not properly closed.
The door seal is damaged or soiled.
Close the door.
Clean/replace the door seal.
The door makes a strange sound when opened.
The door seals are soiled.
Clean the seals.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the shop you purchased the appliance at.
The operating procedures described below are normal
and do not indicate a malfunction.
The refrigerant generates a sound similar to flowing water.
Sometimes you may hear a sound which is generated by the injection process
of the cooling circuit.
Some humidity may accumulate outside the appliance, especially in a moist
surrounding. Simply wipe this humidity away.
The sides of the appliance may get warm while the appliance is running.
Distinct noise
When you run the appliance for the first time or the temperature falls below a
certain level the appliance will operate with high power to reach the preset
temperature.
Condensed water in/on the appliance
may be generated inside or outside the appliance by high humidity or very warm
