55
2.7
Installation of the water inlet hose
❖
Connect the cold water connection hose with a 3/4-inch thread connection and
make sure that it is securely tightened on both sides.
Once on the cold water
connection and on the device itself.
❖
Make sure not to kink or crush the inlet hose. Do not use a used inlet hose.
❖
The inlet hose must not be shortened or damaged because it contains live parts.
❖
Connect the inlet hose with the hose screw connection to a water tap with an
external thread (3/4 inch).
❖
Check the tightness of the connections on
both sides
!
Connect the inlet hose to a connector with a 3/4
inch thread firmly and securely. When the hoses are
new or were not used for an extended period of
time, let the water flow until the hose is clear of any
contamination.
NOTICE!
Otherwise the water inlet may be
blocked and the appliance will be damaged.
2.8 Installation of the waste water hose
Fit the drainage hose of your
appliance to the drainage pipe
without bending.
If the length of the hose is not
sufficient, apply to your
authorized service for an
extension made from the same
material as the original hose.
Remember that the length of
the hose (including extension)
should not exceed 4 meters.
If the drainage hose is longer the 4 m. the dishes will not be cleaned properly .
Check that the connection does not leak. Fix the outlet hose with a hose-holder.
