~ 89 ~
R
EPLACEMENT INTERVAL FOR CARBON FILTERS
➢
At least every
3 - 6 months
according to the frequency of use of the extractor
hood.
You can order the
CARBON FILTERS
at
www.pkm-online.de
➢
Type name of the
CARBON FILTERS
: see chapter T
ECHNICAL DATA
6.3 Replacing of the illuminants
WARNING!
LED illuminants must be replaced by a competent person
only
.
Do not
carry out the replacement of the illuminant yourself. If the
LED illuminants are damaged, please contact a
qualified professional
(electrical engineer):
not covered by the guarantee
!
WARNING!
Switch off the appliance and disconnect it from the mains
before you replace the illuminants (use the relevant fuse in your household
fuse box).
NOTICE!
Do not touch the illuminant with your hands. The sweat on your
fingers will reduce the operating time of your new illuminant. Use a thin
cloth or a thin glove.
6.3.1 Replacing of the standard LED illuminants
I
NSTRUCTIONS FOR THE QUALIFIED PROFESSIONAL
(
ELECTRICAL ENGINEER
)
1.
The LED illuminant should have
cooled down
before you remove it.
2.
Open the extractor hood and remove the aluminium grease filter. The removal
of the grease filter is described in chapter 6.1 C
LEANING OF THE GREASE FILTERS
.
3.
Move one hand into the cavity (
B
) below the motor (
C
) and above the LED
illuminant (
D
/ see fig. below, arrow).