~ 86 ~
NOTICE!
Aggressive detergents such as abrasive detergents, vinegar
cleaners, etc. damage the surface of the extractor hood.
6.1 Cleaning of the grease filters
WARNING!
Failure to follow the cleaning instructions will increase the
RISK OF FIRE due to fat deposits.
NOTICE!
The colour of the metal surface may change due to frequent
cleaning as well as the use of aggressive detergents. Such changes do
not influence the capacity of the appliance and are no reason for
complaint.
NOTICE!
Do not damage the grid of metal-made (aluminium) grease
filters.
You do not need to replace grease / aluminium filters
21
.
❖
Clean the filters by hand or in a dishwasher regularly (up to 30 °C).
❖
Do not
use any acrid or corrosive detergents.
❖
Do not
use any abrasive detergents!
❖
Do not
use any alkaline dishwasher-detergents! (pH more than 7).
C
LEANING INTERVAL FOR ALUMINIUM GREASE FILTERS
➢
Every
2 - 3 weeks
according to the frequency of use of the extractor hood.
H
OW TO DEINSTALL
/
INSTALL THE ALUMINIUM GREASE FILTERS
1.
Lift the glass cover (
A
) of the extractor hood to open the appliance (s. fig. below,
direction of arrow). Behind the glass cover is the aluminium grease filter.
2.
Press the locking button (
B
) on the handle (
C
) of the grease filter (
D
) to release
the grease filter from its lock (s. fig. below). Then remove the grease filter (
D
)
and clean it as described in this chapter.
21
The number of grease filters depends on the model of the extractor hood. The number of grease
filters for your appliance model is indicated in the chapter « T
ECHNICAL DATA
».
