60
• In standby mode, the
POWER
indicator will flash green for approx. 3
seconds when at least 1 “Power ON” schedule is saved.
• When the schedule function is used, the power cord must be connected to
the projector and the outlet. The schedule function does not work when the
breaker in a room is tripped. The power indicator lights orange or green when
the projector is receiving AC power.
NOTE
Schedule Settings
(
&
27
)
7.3 Event Scheduling(continued)
Schedule settings can be configured from a web browser.
Example
: If the IP address of the projector is set to
192.168.1.10:
1) Enter “
http://192.168.1.10/
” into the address bar of the web browser, and select
Projector Web Control from the selection window.
2) Enter your user name and password, and then click the
[OK]
.
3) Click
[Schedule Settings]
on the main menu and select the required schedule
item. For example, if you want the command to be completed every Sunday,
select the
[Sunday]
.
4) Click the
[Enable]
check box to enable scheduling.
5) Enter the date (month/day) to schedule a specific date.
6) Click the
[Apply]
button to save the settings.
7) After configuring the time, command and parameters, click
[Register]
to add
the new event.
8) Click the
[Delete]
button when you want to delete a schedule.
There are three types of scheduling.
1) Daily: Performs the specified operation at a specified time every day.
2) Sunday ~ Saturday: Performs the specified operation at the specified time on a
specified day of the week.
3) Specific date: Performs the specified operation on the specified date and time.
7. Other Functions
