55
• When using the HALF-DUPLEX method, the projector can send out a
maximum of 254 bytes at once.
• If the response data from the external device does not need to be monitored
and the RESPONSE LIMIT TIME is set to OFF, the projector can receive the
data from the computer and send it out to an external device continuously.
The default setting is OFF.
• When the computer controls the synchronization of the transmitting
and receiving of data, it may not be able to control an external device well
depending on the computer's processing status.
NOTE
NOTE
6.4.2 FULL-DUPLEX
This method lets the projector make two way communication, transmitting and
receiving data simultaneously, without monitoring response data from an external
device.
When using this method, the computer and an external device will send the data
out of synchronization. If the data should be synchronized, set up the computer to
do so.
6. Network Bridge Function
6.4 Transmission method (continued)