26
The Alert Items are shown below.
Item
Description
Alarm Time
Configures the Alarm Time parameters.
(Only
Lamp Time Alarm
and
Filter Time Alarm
.)
SNMP Trap
Click the
[Enable]
check box to enable SNMP Trap alerts.
(Except for
Schedule Execution Error, Lamp Time Alarm,
Filter Time Alarm, Filter Status Notification
and
Transition
Detector Alarm
.)
Send Mail
Click the
[Enable]
check box to enable e-mail alerts.
(Except for
Cold Start
and
Authentication Failure
.)
Mail Subject
Configures the e-mail subject line to be sent.
The subject line can be up to 100 alphanumeric characters.
(Except
Cold Start
and
Authentication Failure
.)
Mail Text
Configures the e-mail text to be sent.
The text can be up to 1024 alphanumeric characters, but
using special characters as per below may shorten this
length.
Special characters " ' : & , % \
and space
(Except
Cold Start
and
Authentication Failure
.)
Click the
[Apply]
button to save the settings.
•
The
Filter Error
e-mail trigger is dependent on the FILTER
MESSAGE setting in the SERVICE item of the OPTION menu which defines
the period until the filter message is displayed on the projector screen. An
e-mail will be sent when the usage time of the filter exceeds the time limit that is
set. No notification e-mail will be sent if the FILTER MESSAGE is set to TURN
OFF. (
&
OPTION menu
in the
Operating Guide
)
•
Lamp Time Alarm
defines the threshold for an e-mail notification (reminder)
of the lamp time. When the lamp hours exceed the limit that is configured in the
Projector Web Control, an e-mail will be sent.
•
Filter Time Alarm
defines the threshold for and e-mail notification (reminder)
of the filter time. When the filter hours exceed the limit that is configured in the
Projector Web Control, an e-mail will be sent.
•
Filter Status Notification
can be enabled for either or both
Status 1
and
2
.
These notifications are equivalent to the
FILTER
indicators on the projector.
(
Status 1
: off to orange,
Status 2
: orange to red) Refer to the
Operating Guide
for
FILTER
indicator details.
NOTE
3.1 Projector Web Control - Alert Settings (continued)
3. Web Control
