11
Setting up
Arrangement (continued)
WARNING
(continued on next page)
►
Install the projector where you can access the power
outlet easily.
If an abnormality should occur, unplug the projector urgently.
Otherwise it could cause a fire or electric shock.
►
Do not subject the projector to unstable conditions.
If the projector falls
or topples over, it could result in injury or damage to the projector and the
surrounding things. Using a damaged projector could result in a fire and an
electric shock.
• Do not place the projector in unstable places, such as an inclined surface,
places subject to vibration, on top of a wobbly table or cart, or a surface that is
smaller than the projector.
• Do not put the projector on its side, front or rear position.
• Do not attach nor place anything on the projector unless otherwise specified in
the manual.
• Do not use any mounting accessories except the accessories specified by the
manufacturer. Read and keep the manuals of the accessories used.
• For special installation such as ceiling mounting, be sure to consult your dealer
beforehand.
• It is possible to install the projector for any direction with specified mounting
accessories. Consult with your dealer about such a special installation.
• DLP chip(s) is/are precision-made parts. In rare cases, pixels may be missing
or lit, but this is not a malfunction.
• Direct high-power laser beam onto the lens surface can damage the DLP
chip(s).
• Remove all the attachments including the power cord and cables, from the
projector when carrying the projector.
►
Do not install the pro
jector near thermally conductive or flammable
things.
Such things when heated by the projector could result in a fire and burns.
• Do not place the projector on a metal stand.
►
Do not place the projector where any oils, such as cooking or machine
oil, are used.
Oil may harm the product, resulting in malfunction, or falling from
the mounted position.
►
Do not place the projector in a place where it may get wet.
Getting the
projector wet or inserting liquid into the projector could cause a fire and an
electric shock, and damage the projector.
• Do not place the projector near water, such as in a bathroom, kitchen, or
poolside.
• Do not place the projector outdoors or by the window.
• Do not place anything containing liquid near the projector.
►
Do not block the ventilation inlet and ventilation outlet of the projector.
If the ventilation inlet and ventilation outlet of the projector are blocked, the
accumulated inside heat may cause fire.
