Pixsys DRR460 Series, Руководство пользователя, Страница: 29 / 72

User manual - DRR460 - 29
101
re.ty.
Retransmission Type (Word modbus 2101)
Select the type of Retransmission
0 0...20 mA
1 4...20 mA ( Default )
102
Lo.L.r.
Lower Limit Retransmission (Word modbus 2102)
Linear output lower limit range (value related to 0/4 mA)
-32767..+32767 [digit] (degrees for temperature sensors), Default : 0.
103
up.L.r.
Upper Limit Retransmission (Word modbus 2103)
Linear output upper limit range (value related to 20 mA)
-32767..+32767 [digit] (degrees for temperature sensors), Default : 10000.
104
re.s.e.
Retransmission State Error (Word modbus 2104)
Selects the value of the analogue output in Volt in case of error
0 0 mA ( Default )
1 4 mA
2 20 mA
3 21.5 mA
105
re.s.S.
Retransmission State Stop (Word modbus 2105)
Defines the analogue output value with controller in STOP
0 0 mA ( Default )
1 4 mA
2 20 mA
3 21.5 mA
4 Retransmission active in STOP
106÷110 Reserved Parameters - Group H
Reserved parameters - Group H
GROUP I - SERIALS
111
sL.ad.
Slave Address (Word modbus 2111)
Selects slave address for serial communication when all DIP 1 contacts are set on OFF
1...254. Default : 247.
112
bd.rt.
Baud Rate (Word modbus 2112)
Selects slave address for serial communication when all DIP 2 contacts are set on OFF
0 4800 bit/s
1 9600 bit/s
2 19200 bit/s ( Default )
3 28800 bit/s
4 38400 bit/s
5 57600 bit/s
6 115200 bit/s
113
s.p.p.
Serial Port Parameters (Word modbus 2113)
Selects the type of format for the modbus RTU communication
0 8-N-1 8 bit, no parity, 1 stop bit ( Default )
1 8-E-1 8 bit, even parity, 1 stop bit
2 8-O-1 8 bit, odd parity, 1 stop bit
3 8-N-2 8 bit, no parity, 2 stop bit
4 8-E-2 8 bit, even parity, 2 stop bit
5 8-O-2 8 bit, odd parity, 2 stop bit