Pixsys DRR460 Series, Руководство пользователя, Страница: 18 / 72

18 - DRR460 - User manual
Modbus
address
Descrizione
Read
Write
Reset
value
1213 AO value by serial (Par.100 = 6) R/W 0
1214
Error flags 1
Bit0 = Cold junction error
Bit1 = Process error (sensor)
Bit2 = Error in eeprom writing
Bit3 = Error in eeprom reading
Bit4 = Error missing calibration
Bit5 = Generic error
Bit6 = Hardware error
Bit7 = Error H.B.A. (SSR in short circuit)
Bit8 = Error H.B.A. (SSR/open charge)
Bit9 = Error H.B.A. (partial break of the charge)
Bit10= Overcurrent error
RO 0
1215
Error flags 2
Bit0 = Error eeprom calibrations
Bit1 = Error eeprom calibration constants
Bit2 = Error eeprom parameters
Bit3 = Error eeprom setpoint
Bit4 = Error eeprom service datas A
Bit5 = Error eeprom service datas B
Bit6 = Error eeprom service datas C
RO 0
1216
Command output percentage (0-10000)
Heating output percentage in double loop
R/W 0
1217 Cooling output percentage in double loop (0-10000) RO 0
1218
Command output percentage (0-1000)
Heating output percentage in double loop
R/W 0
1219 Cooling output percentage in double loop (0-1000) RO 0
1220
Command output percentage (0-100)
Heating output percentage in double loop
R/W 0
1221 Cooling output percentage in double loop (0-100) RO 0
1222 Current CT (ampere with tenth) RO 0
1223 Current media CT (ampere with tenth) RO 0
1224 Current CT ON (ampere with tenth) RO 0
1225 Current CT OFF (ampere with tenth) RO 0
1226 Cold junction temperature (degree with tenth) RO -
1227
Output status (0=off, 1=on)
Bit 0 = OUT1
Bit 1 = OUT2
RO 0
1228
Led status (0 = OFF, 1 = ON)
Bit0 = Green led
Bit1 = Red led OUT1
Bit2 = Red led OUT2
RO 0
1229 Key status (0=rilasciato, 1=premuto) RO 0
1230 Dip 1 value RO 0
1231 Dip 2 value RO 0
1232 Process (if temperature, no tenth) RO -
1233 Command setpoint (if temperature, no tenth) R/W EEPROM
1234 Alarm 1 Setpoint (if temperature, no tenth) R/W EEPROM
1235 Alarm 2 Setpoint (if temperature, no tenth) R/W EEPROM
1300 Latch on setting R/W 0
1301 Latch on lower limit calibration R/W 0
1302 Latch on upper limit calibration R/W 0