User manual
- DRR244 - 9
3.4
Programming mode
by keyboard
..see paragraph
software LabSoftview
..on
“Download section”
of official pixsys site: www.pixsys.net
App MyPixsys
..through download the App on Google Play Store®, see paragraph
When activated by a reader/interrogator supporting NFC-V protocol,
controller DRR244 is to be considered a VICC (Vicinity Inductively
Coupled Card) according to ISO/IEC 15693 and it operates at a frequency
of 13.56 MHz.
The device does not intentionally emit radio waves
.
4
Dimensions and Installation
Extractable terminal blocks
Morsettiere Estraibili
72 mm
90 mm
64 mm
Din rail mounting guide EN50022
Attacco a guida DIN EN50022
Memory Card USB
(optional)
Cod. 2100.30.013
24 23 22
24...230V
AC/DC
B (+)
RS485
CT
PT100
TC
NI100 A\V
PTC NTC
A (-) DO2
(PNP)
DI2
(PNP)
DI1
(PNP)
+V
21 20 19
1
NO C
Q1
Q2
Q3
NC NO
NO 0V (PNP)
DO1 AO1
V/mA
C
C
NC
2
3
4
5
6
7
8
9 10 11 12
18 17 16 15 14 13
DRR244
FNC
SET
C1
C2 A1 A2 A3 TUN MAN REM
5
Electrical wirings
This controller has been designed and manufactured in conformity to Low Voltage Directive 2006/95/
EC, 2014/35/EU (LVD) and EMC Directive 2004/108/EC, 2014/30/EU (EMC). For installation in industrial
environments please observe following safety guidelines:
• Separate control line from power wires.
• Avoid proximity of remote control switches, electromagnetic contactors, powerful engines.
• Avoid proximity of power groups, especially those with phase control.
• It is strongly recommended to install adequate mains filter on power supply of the machine where
the controller is installed, particularly if supplied 230Vac.
The controller is designed and conceived to be incorporated into other machines, therefore
CE marking on the controller does not exempt the manufacturer of machines from safety and
conformity requirements applying to the machine itself.
• Wiring of pins: use crimped tube terminals or flexible/rigid copper wire with diameter 0.2 to 2.5
mm2 (min. AWG28, max. AWG12, operating temperature: min. 70°C). Cable stripping lenght 7 to 8
mm.
