23
Steps to share laptop’s screen on the display with USB dongle:
1. Pair USB Dongle with the switcher.
Connect USB Dongle to USB Type A of the switcher for pairing up. Then
the switcher will configure its soft AP’s SSID and password for USB
dongle. Once pairing is done, “Pairing succeeded” will appear on the
display screen.
2. Connect USB Dongle to a laptop.
Connect USB Dongle to the laptop, it will start running and connecting to
the switcher’s soft AP. Once they are connected successfully, the
following words “Press the Key to Share” will appear on the laptop. The
USB Dongle LED stops blinking and turns to be solid on.
Now press the USB Dongle button, you can share your computer’s
screen on display screen immediately.
Guide Screen
The switcher uses a Guide Screen to convey the basic connection
instructions for user access. The Guide Screen can be personalized to allow
custom connection instructions on the switcher’s Web UI page.
The Guide Screen is accessible in the following cases:
•
Auto switch: disconnect all video sources from the switcher, the Guide
Screen will appear automatically.
•
Manual switch:
1) Short press the source switch button on front panel until no active
video sources are displayed.
2) send API command through telnet to the switcher to show the Guide
Screen. For more information about API commands, please see the
separate API documentation.
