M0483
38
/64
Installation and use
ELECTRIC
SHOCK
Electrocution
or death
F
This equipment must be grounded. Improper grounding, setup or usage of
the system can cause electric shock.
• Before performing any maintenance make sure to unplug the device from
the power supply to turn it off and isolate it from the mains;
• Turn off and disconnect power cord before servicing equipment.
• Connect only to a grounded electrical outlets;
• Use only 3 wire extension cords in accordance with local electrical codes.
Extension cords should have a ground lead.
• Ensure ground prongs are intact on power and extension cords;
• Unsuitable extension cable can be dangerous;
• Do not expose to rain. Store indoors;
• Never touch the electric plug of socket with wet hands;
• Do not turn on if the supply connection cable or important parts of the unit
are damaged. Have the damaged parts repaired by qualified staff before
use;
• The connection between plug and socket must stay away from water.
• In accordance with current regulation only extension cable that are la-
belled for outdoor use and have a sufficient capacity should be used out-
door
• For safety reasons, we recommend that, in principle, the equipment be
used only with
- Switch / breaker with adeguate ampacity to the power line
- RCD (Residual Current Device) of 30 mA
• Electrical connections must use ground fault circuit interrupter (GFCI);
• Installation operations are carried out with the box open and accessible
electrical contacts. All these operations have to be done with the unit iso-
lated from the power supply to prevent electrical shock!
• The maintenance of the electrical parts can ‘be done only by qualified in-
staller electrical or electronic;
• Wear insulated gloves for electrician;
• Before performing any maintenance make sure to unplug the device from
the power supply to turn it off and isolate it from the mains;
• Before each use, check that the power cable for damage. Replace immedi-
ately the cable connection to the network if it is damaged.
EQUIPMENT
MISUSE
!
MISUSE CAN CAUSE DEATH OR SERIOUS INJURY
• Do not operate the unit when fatigued or under the influence of drugs or
alcohol;
• Do not leave the work area while equipment is energized or under pressure;
• Turn off all equipment when equipment is not in use;
• Do not alter or modify equipment. Alterations or modifications may void
agency approvals and create safety hazards;
• Route hoses and cables away from traffic areas, sharp edges, moving parts,
and hot surfaces;
• Keep children and animals away from work area;
• Comply with all applicable safety regulations;
• Check the equipment every day. Immediately repair or replace worn or dam-
aged parts only with original spare parts of the manufacturer;
• Make sure that the equipment is classified and approved in accordance
with the regulations for the environment in which it is used;
• Use the device only for its intended use. Contact your distributor for more
information.
Содержание PW Mobile
