Piusi EX 50 12V, Руководство пользователя

Страница: 10 / 19

M0217 EN 27
EN
I ELECTRICAL DATA
PUMP MODEL POWER SUPPLY CURRENT
Voltage (V) Frequency (Hz) Max (*) (A)
12V
12 DC 25
(*) Refers to functioning in by-pass mode.
POWER CORD INLET 1/2” NPT
L OPERATING CONDITIONS
L1 ENVIRONMENTAL CONDITIONS
AMBIENT
TEMPERATURE min. +23 °F / max +104 °F
min. -10 °C / max +40 °C
FLUID
TEMPERATURE min. +23 °F / max +104 °F
min. -10 °C / max +40 °C
RELATIVE HUMID-
ITY max. 90%
LIGHTING The environment must conform to directive 89/654/EEC on
work environments.
In case of non-EU countries, refer to directive EN ISO 12100-2
§ 4.8.6.
ATTENTION The temperature limits shown apply to the pump compo-
nents and must be respected to avoid possible damage or
malfunction.
L2 ELECTRICAL POWER SUPPLY
NOTE The pump must be powered by DC line, the nominal values of
which are indicated on the table in the paragraph "I - ELECTRI-
CAL DATA".
The maximum acceptable variations from the electrical pa-
rameters are:
Voltage: +/- 5% of the nominal value
ATTENTION
Power supply from lines with values that do not fall within
the indicated limits could cause damage to the ELECTRICAL
AND electronic components.