Page 4
For technical questions, please call 1‑800‑444‑3353.
SKU 93980
Separating Bearing
Housings
1. Select the proper size Bearing
Separator Jaw (2 or 14) for the
bearing size being separated.
Refer to the illustration below.
2. Loosen the Separator Jaw
Nuts sufficiently to allow
the jaws to catch between
each bearing housing.
3. Using a wrench (not included)
begin to tighten Nuts until the
jaws are securely set between
the bearing housings.
4. Screw in the selected
Extension Screws (4/12 or
6/9) as shown below.
5. The Extension Screws allows
the user to grip them and add
stability while tightening Nuts.
6. Continue tightening Nuts until the
bearing housings are separated.
7. When the bearing housings
are separated, remove the
Bearing Separator Jaw.
8.
CAUTION!
Overtightening
Separator Jaw Nuts may
damage bearings.
Extension
Screws
Bearing
Housing
Bearing
Separator Jaw
Nut