Page 2
For technical questions, please call 1‑800‑444‑3353.
SKU 93980
Specifications
Bearing
Splitter Sizes
2 IN. / 3 IN.
Push ‑ Puller
Leg Dimensions
2 sets with 2 extension
legs each; 4 IN. / 5 IN.
Yoke
6 IN. With Center Adapter
Important Safety Information
Assembly Precautions
1. Assemble only according to
these instructions. Improper
assembly can create hazards.
2. Wear ANSI‑approved safety
goggles and heavy‑duty work
gloves during assembly.
3. Keep assembly area
clean and well lit.
4. Keep bystanders out of the
area during assembly.
5. Do not assemble when tired
or when under the influence
of drugs or medication.
Use Precautions
1. This product is not a toy. Do
not allow children to play
with or near this item.
2. Use as intended only.
3. Inspect before every use; do not
use if parts are loose or damaged.
4. Maintain product labels and
nameplates. These carry important
safety information. If unreadable
or missing, contact Harbor
Freight Tools for a replacement.
Specific Safety
Precautions
1. Be certain that the separator
jaws are evenly set between
bearing halves before
attempting to separate.
2. Lead Screw (5) should be centered
on the shaft where the bearings
are being pulled to avoid damaging
shaft or bearing housing.
3. Avoid pinching or scraping the
bearing shaft by securely (and
squarely) placing the Jaws
around the bearing housing.
4. Use care when removing the Lead
Screw from the Case to avoid
damaging the threads. Pry up
from the ends of the Lead Screw.
Operating Instructions
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of
this document including
all text under subheadings
therein before set up or
use of this product.
Pulling Bearings
off Shaft
1. Select the proper size Bearing
Separator Jaw (2 or 14) for the
bearing size (2.2 IN. ~ 3 IN. or 2
IN.) being removed from the shaft.
