Page 4
For technical questions, please call 1-888-866-5797.
Item 63984
Installing and Replacing
Grease Cartridge
1. Unscrew and remove the
Extended Pipe (14) from the
Head (11). See photo, below.
2. Pull the T-Grip Handle (1) all the
way back and lock it in place.
3. Unscrew the Barrel (3) from the
Head. Remove the cap from both
ends of the 3 oz. grease cartridge.
Note:
Open and prepare cartridge per
the manufacturer’s instructions.
4. Insert the cartridge into the Head.
5. Slide the Barrel over the cartridge
and back into the Head.
6. Depress the Clamp (2) and
push the T-Grip Handle
forward as far as it will go.
Suction Filling From Bulk
Grease Container
1. Unscrew and remove the
Head from the Barrel.
2. Insert the open end of the Barrel
into the lubricant. Slowly pull
the T-Grip Handle back while
pushing the Barrel deeper into the
lubricant to prevent air pockets
from being pulled into the Barrel.
3. Once the Handle is fully extended,
remove the Barrel from the
lubricant. Wipe the exterior of
the Barrel clean of lubricant.
4. Screw the Head back onto the Barrel.
5. Depress the Clamp and push the
T-Grip Handle back into the Barrel.
Expelling Air Pockets in
the Barrel
Note:
If the Grease Gun
does not work properly, there
may be air pockets in the Barrel.
1. Unscrew the Head 1-1/2 turns.
2. Depress the Clamp and slowly push
the Handle forward to the Barrel.
3. After all excess air is expelled from
the Barrel, retighten the Head.
4. Wipe any grease off the exterior of
the Barrel.
