Page 3
For technical questions, please call 1-888-866-5797.
Item 63984
Important Safety Information
1.
Wear ANSI-approved safety
goggles and heavy-duty
work gloves during use.
2.
Do not use near open flame.
3.
Inspect before every use; do not
use if parts are loose or damaged.
4.
Use as intended only.
Do not
use Grease Gun to hold and
dispense any other materials.
5.
Properly load cartridge before use.
6.
Read grease manufacturer’s
cautions before use.
7.
Keep outer body of Grease Gun dry,
clean, and free from oil and grease.
8.
Read and understand all instructions
and safety precautions as outlined
in the manufacturer’s manual for the
vehicle (or object) to be lubricated.
9.
Keep work area clean
. Cluttered
areas invite injuries.
10.
Keep children away
. Children must
never be allowed in the work area.
11.
Store idle equipment
. When not
in use, tools must be stored in a dry
location to inhibit rust. Always lock up
tools and keep out of reach of children.
12.
Dress properly
. Do not wear loose
clothing or jewelry as they can be
caught in moving parts. Wear restrictive
hair covering to contain long hair.
13.
Do not overreach
. Keep proper
footing and balance at all times.
14.
Maintain tools with care
.
Follow instructions for lubricating
and changing accessories.
15.
Stay alert
. Watch what you are
doing, use common sense. Do not
operate any tool when you are tired.
16.
Check for damaged parts
. Before
using any tool, any part that appears
damaged should be carefully checked
to determine that it will operate
properly and perform its intended
function. Any part that is damaged
should be properly repaired or
replaced by a qualified technician.
17.
Replacement parts and accessories
.
When servicing, use only identical
replacement parts. Use of any
other parts will void the warranty.
18.
Do not operate tool if under the
influence of alcohol or drugs
. Read
warning labels on prescriptions to
determine if your judgment or reflexes
are impaired while taking drugs. If there
is any doubt, do not operate the tool.
19.
Maintenance
. For your safety, service
and maintenance should be performed
regularly by a qualified technician.
20.
WARNING:
The warnings, cautions,
and instructions discussed in this
instruction manual cannot cover all
possible conditions and situations
that may occur. It must be understood
by the operator that common sense
and caution are factors which cannot
be built into this product, but must
be supplied by the operator.
