Pitney Bowes OfficeRight DF500, Руководство оператора

Страница: 27 / 51

DF500 Folder Operator Guide
25 SV40214 Rev. A
Saving a New or Replacement Job (continued)
4. If you press Enter , the job previously saved under “JOB 2”
(for this example) will be replaced by the new job under the
same job number:
5. If you don’t want to erase the job already in memory, press
the
!
key. The display will increment the job number up by
one and will prompt:
6. The new job number offered (in this example 3), is always
the lowest available job number. In this case jobs 1 and 2
are already occupied, while job numbers 3 to 9 are available.
Available job numbers are always offered in ascending order.
It is not pos si ble to “jump” one number.
7. Press Enter to save your new job under the new job number.
8. If all 9 memory spaces are full and you choose not to replace
an existing job, the display will show:
9. To store any more jobs you must first delete existing job(s) as
described in "Deleting a Job from Memory" on page 27.
STORED AS: JOB2
MAKE NEW JOB3?
YES: Enter No:
!
STORED AS: JOB3
–PROGRAMS FULL–
CLEAR JOB FIRST