5. Press
YES
.
Proceed with instructions for your particular Pitney Bowes
facsimile model.
Model 9820
6a. Select the preferred resolution as
follows:
Press
1
= 200 DPI LTR & LGL
or
*Press
2
= 400 DPI LETTER (allows
200 DPI Legal)
or
*Press
3
= 400 DPI LTR & LGL
Model 9830
6b. Select the preferred resolution as
follows:
Press
1
= 200 DPI LTR & LGL
or
*Press
2
= 400 DPI LTR & LGL
*Note:
These resolutions require an optional DRAM memory card and will not be displayed
without the required option installed. Refer to Section 3, “Memory Requirements.”
7. Press
YES
.
Selecting “1” displays:
8. Press
STOP
. Model 9820/9830 printer setup is complete.
4.2 Setting the 9910 as a Printer.
1. Press
FUNCTION
.
2. Via Numeric Keypad, press
7
and then
4
. Press
SET
.
3. Via Numeric Keypad, press
5
and then
9
. Press
SET
.
4. Press
2
, to select Printer I/F. Press
SET
.
Note
: This display may not appear. If it does, press
SET
. The printer will be enabled after reboot. If this
display does not appear, the printer is already enabled. You can continued with Step 5 to
set the resolution or press
STOP
to exit.
PC PRINT RESOLUTION
1=200 DPI LTR & LGL
FAX PARAMETER (01-99)
NO.=
59 PARALLEL PORT I/F
1:INVALID
* SETTING UP *
1=200 DPI LTR & LGL
I/F SETTING CHANGE
PRESS SET TO REBOOT
FUNCTION (1-9)
ENTER NO. OR
δχ
