Pitney Bowes F625, Руководство по эксплуатации, Страница: 9 / 22

8
Operation
4. Check the correct height of the Stacker.
Place the Stacker close to the Inserter
and check whether the studs on the
side of the Stacker fit into the openings
in the Docking plate. If not, loosen the
height adjustment knobs (B) and
readjust.
5. Position the Conveyor Stacker as close
to the inserter as possible and lock all
four castors.
6. Loosen the front and rear end knobs
(C) of the side guide closest to the
inserter output and move the side
guide as close as possible to the
inserter. (The picture shows the inserter
removed for clarity).
Retighten the front and rear end knobs.
7. Install the rear support (D) .
8. For right hand operation; install the
Sensor and Sensor Bracket (E) as
shown in the picture.
For left hand operation the parts are
installed mirrored.
2.1 Setting up for operation with the DI800 Inserter (Cont’d)
B
C
D
E