Pitney Bowes F625, Руководство по эксплуатации, Страница: 20 / 22

19
Reference
Symptom
Possible cause
Remedy
Material gets stuck in the
inlet area
Entry guide brushes set too tight/
low (DI875 only)
Belt speed too low, material builds
up and gets stuck
Step length too small
Side guides set too narrow
The incoming envelope catches
on the previous envelope’s
window
Material slips in underneath side
guide and gets stuck
Readjust brushes upwards
Increase belt speed
Increase step length
Adjust side guides
Increase belt speed and step
length, so that the incoming
envelope won’t hit the previous
envelope window
Loosen side guide knobs, press
side guide down and tighten knobs
Material doesn’t transport
all the way to the stacker
end stacking tray
Side guides too narrow or
funneled
Step too big, material slips on belt
because of insufficient weight
Check side guides are parallel and
have correct clearance
Reduce step length
Material topples over on the
belt, even with low numbers
of items
Step length too big
Side guides not parallel or too
tight
Reduce step, reduce belt speed
Check side guides are parallel and
have correct clearance
Pitney Bowes provides service throughout the world. Should you have questions
about your F625 Conveyor Stacker, or require service or assistance with your
particular application, please call Pitney Bowes or the dealer serving your area.
The phone number will be on a sticker on your F625, and/or on the back cover
of this guide.
A service maintenance contract is available to keep your F625 (as well as your
entire Inserting system) in top condition at nominal cost. Contact Pitney Bowes
or your dealer for details.
3. REFERENCE
3.1 Troubleshooting
3.2 Service