Pitney Bowes F625, Руководство по эксплуатации, Страница: 6 / 22

5
Introduction
Optional In-line Kit
The In-Line Kit is used when the material enters the Conveyor Stacker at the
short end. This is the preferred configuration when running heavy, large envelopes.
Start sensor adjustment knob
The sensor position determines
material overlap
Sensor bracket 2 Idler roller position
adjustment knob
Optional Low-Profile Feet
Lowers the unit by 60 mm (2 3 /
8
”). The Low Profile Feet replace the castors.
The kit contains four feet, for one Conveyor Stacker.