Pitney Bowes F625, Руководство по эксплуатации, Страница: 14 / 22

13
Operation
1. Install Entry Guide Kit, Sensor Bracket
1 and Sensor as shown in the picture.
For right hand orientation, install the
parts mirrored.
2. Check the correct height of the Stacker.
Place the Stacker close to the Inserter
and check whether the docking studs
on the side of the Stacker fit into the
cut-out on the inserter.
If not, loosen the height adjustment
knobs
(A)
and readjust.
3. Position the Stacker as close to the
inserter as possible and lock all four
castors.
2.5 Setting up for operation with the DI875
Entry Guide Kit
Sensor bracket 1
Sensor
Cut-out
Docking studs
A