background image

Glossary • Appendix B

B-5

SV61665 Rev. C

Parity

 

An error checking method used when communicating between 

the computer and a peripheral device.

PCL commands

 

A standard printer language of commands to access printer 

features or options.

Point size

 

A measurement standard for the height of a printed character. 

One point equals one seventy-second of an inch.

Postal regulations

 

Rules and guidelines set up by the Postal Authority for mail. 

Power socket

 

The socket on the back of the printer where the line cord is 

connected.

Print cartridge

 

A removable container that holds ink for printing.

Print quality

 

Refers to the resolution or level of sharpness of the printed 

image.

Printer driver

 

See Drivers.

Record

 

A collection of related fields that make up the name and address 

of an individual in a mailing list file.

Sans serif

 

A font typeface that contains no serifs or finishing strokes on the 

top or bottom of the characters. Helvetica and Arial are examples 

of sans serif typefaces.

Scaleable fonts

 

Outline printer fonts that are stored in a mathematical form and 

can be enlarged or reduced.

Spacing

 

The relative spacing between characters.

Содержание AddressRight DA70S











































































Отзывы: