Pitney Bowes AddressRight DA70S, Руководство оператора

Страница: 23 / 74

2 • Printer Basics
2-6 SV61665 Rev. C
3. Setting the Feed Angle
The height of the input guide depends on the type of material
you're running:
• Heavy material—adjust to a low angle
• Standard material—adjust to the center (45 degree angle)
• Light material—adjust to a high angle
To make the adjustment:
A. Unlock the knob on the input guide slide by turning
counterclockwise.
B. Move the input guide up or down as required by sliding the
retaining knob.
C. Turn the lock knob clockwise to secure the input guide.
NOTE: Center line of the knob aligns with relative number of
the scale. Refer to the scale on following page.
Knob
Scale