Pitco SRTE Скачать руководство пользователя страница 2

TO THE PURCHASER, OWNER AND STORE MANAGER

Please review these warnings prior to posting them in a prominent location for reference.

ii

L20-292, rev. 1 (05/11)

WARNING

DO NOT store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.

WARNING

Improper installation, alteration, service or
maintenance can cause property damage, injury or
death. Read the installation, operating and
maintenance instructions thoroughly before installing
or servicing this appliance.

WARNING

Installation, maintenance and repairs should be
performed by a Pitco Authorized Service and Parts
(ASAP) company technician or other qualified
personnel.  Installation, maintenance or repairs by an
unauthorized and unqualified personnel will void the
warranty.

WARNING

Installation and all connections must be made
according to national and local regulations and codes
in force.

WARNING

A country approved all pole circuit breaker with a
minimum open contact gap of 3mm must be used for
proper installation.  (CE countries)

WARNING

During the warranty period if a customer elects to use
a non-original part or modifies an original part
purchased from Pitco and/or its Authorized Service
and Parts (ASAP) companies, this warranty will be
void.  In addition, Pitco and its affiliates will not be
liable for any claims, damages or expenses incurred
by the customer which arises directly or indirectly, in
whole or in part, due to the installation of any
modified part and/or received from an unauthorized
service center.

WARNING

This appliance, when installed, must be electrically
grounded in accordance with local codes, or in the
absence of local codes, with the National Electrical
Code, ANSI/NFPA 70, or the Canadian Electrical Code,
CSA C22.2, as applicable.

WARNING

Adequate means must be provided to LIMIT the
movement or this appliance without depending on the
electrical cord connection.  Single appliances
equipped with legs must be stabilized by installing
anchor straps.  All appliances equipped with casters
must be stabilized by installing restraining chains.

WARNING

DO NOT alter or remove structural material on the
appliance to accommodate placement under a
ventilation hood.

WARNING

This appliance is intended for professional use only
and should be operated by fully trained and qualified
personnel.

WARNING

If the supplied power cord is damaged, it must be
replaced by a Pitco Authorized Service and Parts
(ASAP) company technician, or a similarly qualified
person in order to avoid a hazard.

WARNING

The power supply must be disconnected before
servicing, maintaining or cleaning this appliance.

WARNING

The appliance is NOT jet stream approved.  DO NOT
clean the appliance with a water jet.

WARNING

DO NOT attempt to move this appliance or transfer hot
liquids from one container to another when the unit is
at operating temperature or filled with hot liquids.
Serious personal injury could result if skin comes in
contact with the hot surfaces or liquids.

WARNING

DO NOT sit or stand on this appliance. The
appliance’s front panel, tank, splash back, tank cover,
workshelf, drain board is not a step.  Serious injury
could result from slipping, falling or contact with hot
liquids.

WARNING

NEVER use the appliance as a step for cleaning or
accessing the ventilation hood.  Serious injury could
result from slips, trips or from contacting hot liquids.

WARNING

The water level should be maintained at the level line.
DO NOT turn the appliance on until the heating
elements are fully covered with water at all times.
Serious injury could result from hot steam vapors off
the heating element.

WARNING

If overflow drain is not equipped or if overflow drain
stop is used, do not leave appliance unattended while
filling with water.  Over filling the appliance can cause
serious injuries and damage the equipment.

WARNING

Completely shut the appliance down when the water is
being drained from the appliance. This will prevent the
appliance from heating up during the draining and
filling process.  Serious injury and heating element
damage can occur.

WARNING

This appliance is intended for indoor use only.

WARNING

DO NOT operate appliance unless all panels and
access covers are attached correctly.

WARNING

It is recommended that this appliance be inspected by
a qualified service technician for proper performance
and operation on a yearly basis.

Содержание SRTE





















Отзывы: