Pit Boss 72755 Скачать руководство пользователя страница 10

Страница: 10 / 32

ENGLISH

9. SECURING THE CHIMNEY

Parts Required:

1 x Chimney Gasket

(#6)

1 x Chimney Stack

(#7)

Installation:

• Locate the chimney opening on the side of the main barrel. Remove

the pre-installed two screws, locking washers, and washers.

• From the outside of the main barrel, secure the chimney gasket and

chimney stack to the side panel by re-installing the two screws, locking

washers, and washers. The screw will fasten to the pre-mounted nut

on the inside of the barrel.

• Next, secure the chimney cap onto the top of the chimney stack with

the screw and nut as shown.

NOTE: Adjust the chimney cap to affect the airflow inside the main

grill. If cooking at low temperature, keep the cap more open. Ensure

the chimney cap allows for air to escape.

10. INSTALLING THE COOKING COMPONENTS

Parts Required:

3 x Cooking Grids

(#2)

1 x Upper Cooking Rack

(#1)

1 x Flame Broiler Main Plate

(#5)

1 x Flame Broiler Slider

(#4)

Installation:

• First, return the large diffuser plate into the bottom of the main barrel,

and secure using previously removed four screws. Note illustration 10A.

• Insert the flame broiler main plate into the main grill. Rest the flame

broiler main plate on the built-in ledge (on the inside right) of the

main grill that directs grease towards the grease bucket. Slide the

entire piece to the left side, and the two slots on the flame broiler

main plate will fit into the rounded ledge above the fire pot. It will sit

slightly at a downward angle. Note illustration 10B.

NOTE: If the main plate is lying on the large diffuser plate on the

base of the barrel, it is installed incorrectly.

• Place the flame broiler slider on top of the flame broiler main plate,

covering the slotted openings. Ensure the raised tab is on the left,

to easily adjust for direct or indirect flame when cooking. Note

illustration 10C. Both flame broiler parts are lightly coated with oil to

avoid rusting when shipped.

NOTE: When the flame broiler slider is open, and direct flame is used

while cooking, do not leave the grill unattended for any period of time.

• Place the cooking grids, side-by-side, on the grid ledge inside the main

grill. Place the upper cooking rack on the upper ledge inside the main

grill. The cooking rack will lock into place.

• The unit is now completely assembled.

NOTE: To maintain the searing and grilling performance of your

cooking grids, regular care and maintenance Is required.

10C

10B

10A

Содержание 72755

































Результаты поиска

Содержание 72755

Отзывы:

Похожие инструкции для 72755

Бренды по названию

Популярные бренды

Pit Boss 72755, Инструкция по сборке и эксплуатации

Результаты поиска

Содержание 72755

Отзывы:

Похожие инструкции для 72755

Бренды по названию

Популярные бренды