14
UNDERSTANDING THE CONTROL BOARD
CONTROL
DESCRIPTION
The
LCD Screen
is used as the information center for
your unit. The LCD screen will display the current grill
temperature (ACTUAL) and meat probe temperature (MP1).
See
Troubleshooting
for more information on error codes.
READOUT
DESCRIPTION
Flashing
Screen
Indicates the unit was just connected to
AC power. Screen flashes three times, then
turns off.
MP1
Indicates the meat probe temperature
when probe is connected.
Actual
Indicates the current temperature of unit.
Set
Indicates the desired temperature that has
been selected.
noP
Indicated that no meat probe is connected.
Er1
Temperature probe wire not connecting.
Er2
Failure to reach minimum temperature of
130F during start-up cycle.
Er3
Fire has gone out due to lack of fuel.
ErH
Grill has overheated.
ErP
Power loss during operation.
ID
DESCRIPTION
Motor
Indicates the auger motor is turning and
feeding pellets to the fire pot.
Ignitor
Indicates the igniter is on. When first
starting your unit, the igniter runs
continuously for the start-up cycle.
Fan
Indicates the fan is running. If the grill is in
operation, the fan is on.
No Pellet
Indicates the auger motor is no longer able
to feed pellets to the fire pot. Likely, the
hopper is empty and requires refilling.
Press and hold the
Prime Button
to activate an extra feed
of pellets to the fire pot. This can be used to add more fuel to
the fire just before opening the barrel lid, resulting in a quicker
heat recovery time. It can also be used to add more fuel while
smoking, to increase the intensity of clean smoke flavor.
Overfeeding the fire pot may damage to grill barrel paint.
The
Temperature Switch Button
is used to change the
temperature readout on the LED Screen. Press the button
to switch to Fahrenheit (ºF) or to Celsius (ºC), as preferred.
Default is set to Fahrenheit.
The
Temperature Control Dial
allows you to set your desired
temperature. Rotate the knob marker to select from Smoke,
any of the eight temperature presets, or High. Once rotating
the dial, the SET Temperature on the LCD Screen will adjust.
PRIME
F/C
PRIME
F/C
300
350
250
225
400
450
475
Smoke
Off
High
200
FC
Actual
MP1
IGNITOR
NO
PELLET
Set
FC
Actual
MP1
IGNITOR
NO
PELLET
Set
FC
MP1
Actual
Set
IGNITOR
NO
PELLET