LED status explanation
LED
LED Status
System working status
POWER
Off
Hasn’t turned on the switch; hasn’t
connected the power; no power in built-in
battery
Red
power supply is normal
ST
AT
US
Power
on
Red
Ready to code wireless sensors
Orange (flash slowly)
Check SIM card and search GSM network
Green (flash slowly)
SIM card and GSM signal are normal; have
stored numbers in SIM card; in arm status
Green
have not stored numbers in SIM card; in
disarm status
Normal
working
Red (flash slowly)
In alarm status
Red (flash quickly)
Remote controlled by SMS commands or
phone
Green
Disarm
Green (flash slowly)
Out Arm
Green (flash quickly)
Home Arm
MONITOR
On
Can monitor the scene when alarming, but
the siren will not ring
Off
Can not monitor the scene when alarming,
but the siren will ring
ALARM
On
The siren will ring when alarming
Off
The siren will not ring when alarming
d. Configuration of the alarm unit:
There are 10 connect ports at the top side of the unit:
(
GND; SIREN; RELAY1; RELAY2; O3 (SPEAKER); O2; O1; I3; I2; I1)
:
GND:
power ground.
SIREN:
Connect the black wire to GND port and the red wire to siren port.
