panel changes to orange to search for GSM network, then to green.
Note:
If there were 4 wireless sensors in the host, they stand for zone 1
to zone 4, and then the new added sensor will be 5th zone in the host.
VIII. Delete detectors
In case of the coded sensors or detectors are lost, you can delete the
coded information of these detectors so that they can not control your
alarm system.
Keep pressing the reset button, then power on the system. One beep
sound or LED flashes, shows reset is successful. All registered
detectors have been deleted from the unit. You can register them again
with the above mentioned procedures. System reset will not change the
SMS message.
Basic Kit:
-
Main Panel – 1 pc
-
Wireless PIR detector – 1 pc
-
Wireless door (gap) sensor – 1 pc
-
Remote controller – 2 pcs
-
Antenna – 1pc
-
Mini wired siren – 1 pc
-
Power adaptor – 1pc
-
User manual – 1pc
