Piscine Laghetto AZUR 2000, Инструкция по эксплуатации

Страница: 94 / 132

94
4 POOL FILLING AND NOTICE
the pool must be filled with clean water. at the begin-
ning of the filling phase (in the rectangular models)
when the sides are not pushed out by the water, the
pool structure will be folded in at the corners; we rec-
ommend placing a piece of cardboard at the corners
between the folded sides to avoid scuffing the contact
points. the water level (in all models) must be be-
tween 15 and 5 cm. below the top of the pool in order
that the water circulates efficiently. When the pool is
full you can start up the filtration system.
Chlorine must be always dissolved into the skimmer with the pump working in
order to avoid that parts of solide chlorine get in contact with the walls or with
the bottom of the pool.
the contact between chlorine and the liner will cause a fading of the liner colour,
but it will not weaken the structure. so you have to pay attention while dissolv-
ing the chemicals into the skimmer: if accidentally they get in contact with the
bottom of the pool use the vacuum cleaner at once.
When you mean to stop the
filtration system for a quite
long period we recommend
to remove any undissolved
residue of chlorine. While
dissolving slowly, chlorine
would fall to the bottom of
the skimmer with the above-
mentioned effects.
Filling and maintenance
1
2
3