Page 8 of 19
Insert a castor wheels into one of the four holes located in the base and
push in hard all the way ensuring they are secured in place.
Repeat for the other three castor wheels.
Turn the vacuum cleaner base upright and rest on the castor wheels.
Refit the large dust filter and then refit the top motor housing, aligning the
side latches, and then lock down.
5.2 Fitting Flexible Hose
Insert the coupling end of the vacuum cleaner hose into the Hose
Coupling / Air inlet hole and rotate clockwise until it locks into place
To remove flexible hose from the vacuum cleaner, rotate the coupling
anti-clockwise and pull straight out.
