Page 13 of 19
13 Emptying the Dust Canister – Dry Use
Empty the Dust Canister as frequently as possible or when the suction power
is reduced.
Remove the top off the Dust Canister by unclipping the two “Motor to
Canister Lock” Latches (one either side) then lift the motor housing off the
dust canister.
Remove the large filter and then empty the canister by
tipping out the debris over a rubbish bin.
The inside of the Dust Canister can be wiped clean or
washed in warm soapy water and dried thoroughly.
(Refer Maintenance Section).
Refit the large filter, top motor housing (aligning the
side latches) and then lock down.
14 Emptying the Dust Canister – Wet Use
Empty the Dust Canister immediately after use.
Remove the top off the Dust Canister by unclipping the two “Motor to
Canister Lock” Latches (one either side) then lift the motor housing off the
dust canister.
