Using the tuner
07
47
En
Naming station presets
For easier identification, you can name your
station presets.
1
Choose the station preset you want to
name.
See
Listening to station presets
(this page) for
how to do this.
2
Press T.EDIT (TUNER EDIT).
The display shows
ST. NAME
, then a blinking
cursor at the first character position.
3
Input the name you want.
Names can be up to four characters long.
• Use the
MULTI JOG/INPUT SELECTOR
dial
(front panel) or the
ST +/-
buttons (remote)
to select characters.
• Press
ENTER
to confirm a character. If no
character is input, a space is input.
• The name is stored when
ENTER
is
pressed after choosing the fourth
character.
To erase a station name, simply repeat steps
1-3 and input four spaces instead of a
name.
Once you have named a station preset, you
can press
DISPLAY
when listening to a
station to switch the display between the
name and the frequency.
Listening to station presets
Having stored up to 30 stations (see previous
page), preset stations can be easily recalled.
1
Press TUN (remote) or use the MULTI
JOG/INPUT SELECTOR dial on the front
panel to select the tuner.
2
Press CLASS to select the class in which
the station is stored.
Press repeatedly to cycle through classes A, B
and C.
3
Press ST +/– (S/–) to select the
station preset you want.
• If the receiver is left disconnected from the
AC power outlet for an extended period,
the station memories will be lost and will
have to be reprogrammed.
XRB3013A.45.48
01.12.12, 4:48 PM
47