4
Part Names
Part Names
Front Panel
1. INPUT SELECTOR dial: Switches the input to be played.
2. MCACC indicator: This lights when you have enabled the speaker calibration made with
MCACC (P20).
3. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to turn the
display off.
4. DIMMER button: You can switch the display off or adjust the brightness of the display in
three steps.
5. TUNING MODE button: Switches tuning to an AM/FM station between automatic tuning
and manual tuning (P29).
6. +FAVORITE button: Used to register AM/FM radio stations (P30).
7. HOME MENU button: Displays the Home screen (P44, 55, 58).
8. Display (P5)
9. Cursors ( / /
/ ), ENTER button: Select the item with the cursors and press
ENTER to confirm. Use them to tune to stations when using TUNER (P29).
10.NETWORK indicator: Lights when "NET" input is selected and the unit is connected to
the network. If the unit is in standby mode, this lights when functions such as HDMI CEC
and network standby are enabled.
11. WIRELESS indicator: Lights when the unit is connected to the wireless network and when
connected to a BLUETOOTH wireless technology enabled device.
12.Remote control sensor: Receives signals from the remote controller.
0
The signal range of the remote controller is within about 16
y
/5 m, at an angle of 20° on
the perpendicular axis and 30° to either side.
13.RETURN button: Returns the display to the previous state during setting.
14.MASTER VOLUME
15.
Í
STANDBY/ON button
16.PHONES jack: Connect stereo headphones with a standard plug (Ø1/4
z
/6.3 mm
> Install
> Playback
Advanced Setup | Supplementary Information | Others