Pioneer VSX-520, Руководство по эксплуатации

Страница: 36 / 160

Listening to your system 04
36
En
Choosing the input signal
On this receiver, it is possible to switch the
input signals for the different inputs as
described below.
1
1 Press on the remote control.
2 Press SIGNAL SEL to select the input
signal corresponding to the source
component.
When
DIGITAL
(
C1
/
O1
/
O2
) or
HDMI
(
H
) is
selected and the selected audio input is not
provided,
A
(analog) is automatically selected.
Each press cycles through the following:
•
A
– Selects the analog inputs.
• DIGITAL – Selects the digital input. The
coaxial 1 input is selected for C1 , and the
optical 1 or 2 audio input is selected for
O1 or O2 .
•
HDMI
– Selects an
HDMI
signal.
H
can be
selected for BD, DVD or TV/SAT input. For
other inputs,
HDMI
cannot be selected.
2
When set to DIGITAL or HDMI ,
2
lights when
a Dolby Digital signal is input, and DTS lights
when a DTS signal is input.
When the HDMI is selected, the A and
DIGITAL indicators are off (see page 12).
Using the headphone
• Insert the headphone into the PHONES
jack.
The sound is heard from the headphone and no
sound is heard from the speakers connected to
this receiver. The listening mode when the
sound is heard from the headphone can be
selected only from
STEREO or ALC .
Note
1 • When digital input (optical or coaxial) is selected, this receiver can only play back Dolby Digital, PCM (32 kHz to 96 kHz) and
DTS (including DTS 96 kHz / 24 bit) digital signal formats. The compatible signals via the HDMI terminals are: Dolby Digital,
DTS, SACD (DSD 2 ch), PCM (32 kHz to 192 kHz sampling frequencies), Dolby TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-
HD Master Audio and DVD Audio (including 192 kHz). With other digital signal formats, set to
A
(analog) (
TUNER
).
• You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make
the proper digital connections (page 22) and set the signal input to
C1
/
O1
/
O2
(
DIGITAL
).
• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.
2 When the
HDMI
option in Setting the Audio o p tions on page 33 is set to
THRU
, the sound will be heard through your TV, not
from this receiver.
RECEIVER
VSX-520_UCSMXCN_En.book 36 ページ ２００９年１２月１５日 火曜日 午後２時３３分