Introduction of audio
adjustments
1
2
3
1
Loud indicator
Appears in the display when loudness is
turned on.
2
Audio display
Shows the audio adjustments status.
3
SW indicator
Shows when the subwoofer output is turned
on.
%
Press AUDIO to display the audio func-
tion names.
Press
AUDIO
repeatedly to switch between
the following audio functions:
FAD
(balance adjustment)
Loud
(loudness)
NoFAD
(nonfading output on/off setting)
NoFAD: 0
(nonfading output setting)
Phase:NOR
(subwoofer setting)
80 : 0
(subwoofer cut-off frequency)
SLOPE
(sub-
woofer slope)
F-HPF
(front high pass filter
cut-off frequency)
F-SLP
(front high pass fil-
ter slope)
R-HPF
(rear high pass filter cut-off
frequency)
R-SLP
(rear high pass filter slope)
#
When the subwoofer controller setting is only
P/O:Full
, you can switch to the nonfading output
on/off setting. (Refer to page 43.)
#
You can select the nonfading output setting
only when nonfading output is turned on in the
nonfading output on/off setting.
#
When the subwoofer controller setting is only
P/O:Full
, you cannot switch to
Phase:NOR
.
(Refer to page 43.)
#
You can select the
80 : 0
(subwoofer cut-off
frequency) and the
SLOPE
(subwoofer slope) only
when subwoofer output is turned on in the
Phase:NOR
.
#
To return to the display of each source, press
BAND
.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FAD.
Press
AUDIO
until
FAD
appears in the display.
#
If the balance setting has been previously ad-
justed,
BAL
will be displayed.
2 Press
a
or
b
to adjust front/rear speak-
er balance.
Each press of
a
or
b
moves the front/rear
speaker balance towards the front or the rear.
FAD :F25
FAD :R25
is displayed as the front/
rear speaker balance moves from front to rear.
#
FAD : 0
is the proper setting when only two
speakers are used.
3 Press
c
or
d
to adjust left/right speaker
balance.
Each press of
c
or
d
moves the left/right
speaker balance towards the left or the right.
BAL :L25
BAL :R25
is displayed as the left/
right speaker balance moves from left to
right.
Audio Adjustments
En
34
Section
09