Playing a tape
1
2
These are the basic steps necessary to play a
tape with your cassette player. More advanced
cassette player operation is explained starting
on the next page.
1
Tape direction indicator
Shows the direction of the tape transport.
2
Play time indicator
Shows the elapsed playing time of the cur-
rent side of the tape.
1 Insert a cassette tape into the cassette
loading slot.
Playback will automatically start.
Cassette loading slot
#
You can eject a cassette tape by pressing
TAPE EJECT
.
2 After a cassette tape has been inserted,
press SOURCE to select the cassette player.
Press
SOURCE
until you see
Cassette
dis-
played.
3 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
4 To perform fast forward or rewind,
press
c
or
d
.
FF
or
REW
appears in the display.
#
To cancel fast forward or rewind and return to
playback, press
BAND
.
#
You can cancel fast forward or rewind by
pressing
c
or
d
in the same direction twice.
5 To perform forward or rewind music
search, press
c
or
d
twice.
F-MS
(forward music search) or
R-MS
(rewind
music search) appears in the display. The cas-
sette player will fast forward or rewind to the
next or previous blank spot on the tape and
begin to play.
#
To cancel music search and return to play-
back, press
BAND
.
#
You can cancel music search by pressing
c
or
d
in the same direction again.
6 To change the direction of the tape
transport, press BAND.
Notes
!
Do not insert anything other than a cassette
tape into the cassette loading slot.
!
A cassette left partially inserted after ejection
may incur damage or fall out.
!
Play time indicator starts from
00
00
in the
following cases:
When a tape is inserted
When the tape direction is changed
When you rewind the tape to the begin-
ning
!
Play time indicator is halted when fast for-
ward, rewind or music search is operating.
Cassette Player
En
14
Section
05