LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage model is provided with
this switch.
XV-DV700(Australian model) is not
provided with this switch.
H014 En
The line voltage selector switch is located on
the rear panel. Check that it is set properly
before plugging the power cord into the
outlet. If the voltage is properly set or if you
move to an area where the voltage
requirements differ, adjust the selector
switch as follows:
• Be sure to disconnect the power cord from
its outlet before making this adjustment.
• Use a medium-sized(flat blade) screwdriver.
Insert the tip of the screwdriver into the
groove of the selector switch and turn it so
that the power voltage marking of your
area points to the arrow.
240 V
VOLTAGE SELECTOR
220V
–230V
110V
–127V
CAUTION 240 V
Power source voltage is factory adjusted
240 volts. If your area is different, change
voltage selectors settings.
H038En
CAUTION :
VORSICHT :
ADVARSEL :
VARNING :
VARO! :
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM.
SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENNABDECKUNG GEÖFFNET
NICHT DEM STRAHL AUSSETZEN!
SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING UNDGÅ UDSÆTTELSE FOR
STRÀLING.
SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD BETRAKTA
EJ STRÅLEN.
AVATTAESSA ALTISTUT NÄKYVÄ JA NÄKYMÄTTÖMÄLLE LASERSATEIL YLLE. ÄLÄ
KATSO SÄTEESEN.
VRW1872
CUIDADO :
RADIACIÓN LÁSER VISIBLE E INVISIBLE AL ESTAR ABIERTO. EVITAR EXPOSICIÓN AL
RAYO.
On the inside cover of the unit
[For South American models]
[For South American models]
NS03_ZDR/ZPW.book 3 ページ 2003年6月30日 月曜日 午後4時6分