Getting started
03
29
En
English
Italiano
Français
Nederlands
Español
Deutsch
2
Press SYSTEM SETUP.
3
Use the
/
(cursor left/right)
buttons to choose ‘St. Memory?’ then
press ENTER.
4
Use the
/
(cursor up/down)
buttons to select the station preset you
want.
There are 30 preset locations; each can store
one station preset.
5
Press ENTER to save the station preset.
• If the system is unplugged from the power
supply completely, saved stations will
remain for several days, after which you’ll
have to save them again.
Listening to station presets
1
Make sure the TUNER function is
selected.
2
Use the ST +/– buttons to select a
station preset.
Listening to other sources
You can connect up to three external sources
(TV, satellite receiver, etc.) to this system,
including one digital source. See also
Connecting auxiliary components
on page 72.
1
If the system isn’t already on, press
STANDBY/ON to switch on.
Also make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2
Select the source you want to listen to.
• Press
TV
to select the
TV
input, or use the
LINE
(
L1/L2
) button to select the
LINE 1
ANA, LINE1 DIG
or
LINE 2 ANA
input.
3
If necessary, start playback of the
external source.
STANDBY/ON
L1/L2
CD
FM/AM
OPEN CLOSE
DISPLAY
DVD
TUNER
TV
LINE
NS03_ZDR/ZPW.book 29 ページ 2003年6月30日 月曜日 午後4時6分