The Initial Setup menu
15
129
En
English
Tuner
Auto Channel
Setting
Auto Scan
Select your country and then wait for the recorder to auto tune into channels in
your area. After auto scan has finished, the channel mapping screen appears
showing which channels have been assigned to which program numbers. You
can skip unwanted channels using the Manual CH Setting option below.
Press
HOME MENU
to exit the channel mapping screen.
Download from
TV
If your TV supports this feature you can download all the channels that your TV is
tuned to via the SCART input. Select your country and then wait for the down-
load to complete. After the download is complete, the channel mapping screen
appears, as above.
See also the operating instructions that came with your TV for more information.
Manual CH Setting
Next Screen
Proceed to the next screen if you need to adjust any of the settings made by auto
tuning. Select your country, then proceed to the manual channel setting screen:
• Change channel presets using the
/
buttons.
• To skip the displayed channel (because there is no station assigned to that
channel), change the
Skip
setting to
On
.
• Set the
CH SYSTEM
setting to match the channel system of your country or
region.
• Set the
CHANNEL
setting to the channel you want to assign to the current
channel preset.
• To manually fine tune the channel, change the
AFT
setting to
Off
then adjust
the
Level
setting.
• Set the
Sound System
setting to match the sound system of your region.
• The
Name
field allows you to input a name of up to five characters for the
current channel preset.
• If the currently selected channel is scrambled requiring a decoder connected
to the
AV2 (INPUT 1/DECODER)
, set the
Decoder
setting to
On
.
Channel Swapping
Next Screen
Proceed to the next screen to swap channel assignments of different presets so
that you can group together presets that naturally go together. Select two
presets to swap then press
ENTER
.
Video In/Out
Input Colour
System
Next Screen
Proceed to the next screen to set the input colour system for the external input
and the built-in TV tuner. Use the
CH +/–
buttons to change the preset. On the
default
Auto
setting the recorder can generally correctly detect whether the
input signal is PAL, SECAM, 3.58 NTSC or PAL-60, but in some cases you may
have to set it manually if the picture is displayed incorrectly.
See also About the input colour system on page 135 for more information on this setting.
Component Video
Out
Interlace •
Select if your monitor/TV is not compatible with progressive-scan video.
Progressive
Select if your monitor/TV is progressive-scan compatible. Check the operating
instructions that came with your monitor/TV if you’re not sure.
For Component Video Out to be effective, the AV1 Out setting (see AV1 Out below) must be set to something other than
RGB
.
AV1 Out
Video •
Sets the
AV1(RGB)-TV
SCART output to standard composite video (compatible
with all TVs).
S-Video
Sets the
AV1(RGB)-TV
SCART output to S-video. Recommended if you are using
a long SCART cable.
RGB
Sets the
AV1(RGB)-TV
SCART output to RGB. Good quality but check your TV for
compatibility. Note that on this setting signals from the built-in tuner and from
external inputs is not output when the recorder is in TV mode.
Setting
Options
Explanation
Содержание RCS-404H
Страница 20: ...20 En SX SW606 SX SW404 S ST606 S ST404 ...
Страница 42: ...42 En DVD RECORDER DVR 640H AV DVR 440H AV ...
Страница 151: ...151 En English ...