Pioneer RCS-404H, Руководство по эксплуатации

Страница: 128 / 152

The Initial Setup menu 15
128
En
Chapter 15
The Initial Setup menu
Using the Initial Setup menu
The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on.
Some settings can only be changed when the recorder is stopped. During playback and recording these settings are
grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.
• Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •.
Setting Options Explanation
Basic
Clock Setting Auto
Set the channel that broadcasts a clock signal and the clock will be set automat-
ically.
Manual • If there is no channel that broadcasts a clock signal in your area, you can set the
time and date manually.
The clock must be set in order to use timer recording.
Input Line System 525 System Use for NTSC or PAL-60 recording from an external input.
625 System • Use for standard PAL or SECAM recording.
See also About the input line system on page 134 for more information on this setting.
Power Save Mode 1 Only signals arriving at the antenna input are passed through to the antenna
output when the recorder is in standby.
Mode 2
No input signals are passed through to the outputs when the recorder is in
standby.
Off • When the recorder is in standby, all signals arriving at the SCART and antenna
inputs are passed along to the outputs.
HELP Setting On •
Switches on the automatic Help screens for GUI displays.
Off
Switches off the automatic Help screens for GUI displays. (Press
HELP
on the
remote to manually display the Help screen.)
Setup Navigator Start
Select to start the Setup Navigator. See also
Switching on and setting up
on
page 59
.