15
En
Installation and Connections
Fran
ç
ais
English
How to route cables
Speed clamps and bead bands for bunching cables together
are shipped with this panel. Once components are connected,
route and bundle cables according to the following instructions.
1
Organize cables together using the provided
speed clamps.
Insert
1
into an appropriate hole on the rear of the
unit
then snap
2
into the back of
1
to fix the clamp.
Speed clamps are designed to be difficult to undo
once in place. Please attach carefully.
To attach the speed clamps to the main unit
Connect the speed clamps using the 6 holes marked with
“
‡
” below, depending on the situation.
* As viewed from the rear of the display.
Installation and Connections
1
2
To remove speed clamps
Using pliers, twist the clamp 90° and pull it outward.
In some cases the clamp may have deteriorated over
time and may get damaged when removed.
2
Bunch separated cables together and secure them
with the provided bead bands.
Do not allow excessive stress to be placed on the
cable ends.
Note
Cables can be routed to the left or to the right.
Illustration depicts PDP-505CMX/
PDP-504CMX model.
* As viewed from the rear of the display.
