Pioneer PDK-5001 Скачать руководство пользователя страница 1

Страница: 1 / 115

PLASMA DISPLAY : PDP-501MX/PDP-V501X

TABLE-TOP STAND: PDK-5001

SPEAKER SYSTEM: PDP-S02-LR

PRECAUTIONS

• We accept no responsibility for losses resulting from

the use of parts other than those supplied by us.

• We guarantee the performance of our products only

when they are assembled and adjusted as described in

this manual.

• The specifications and external designs shown in this

manual are subject to change without notice.

CAUTION

Exclamation marks placed within triangles are

intended to alert users to the presence of important

safety information. Be sure to read instructions

indicated by this symbol.

This manual provides precautions and information for installation, preparation, and handling of the plasma display and

its dedicated mounting hardware.

Before installation and preparation work, choose a safe and appropriate site after thorough consideration of construction,

materials used, strength, and surroundings. If the adequate safeguards are not in place, immediately halt the installation

process and discontinue marketing activities.

TECHNICAL MANUAL

(Ver.1.1A)

About Mounting/Installation

• The product is sold under the assumption that in-

stallation will be performed by experienced, quali-

fied experts. Refer all mounting and installation work

to qualified personnel, or consult the nearest

PIONEER dealer for assistance.

• We accept no responsibility for accident or loss re-

sulting from failure to select an appropriate installa-

tion site, or for those occurring during assembly, in-

stallation, mounting, or operation of this product, or

resulting from modifications made to the product,

or from natural calamities.

Содержание PDK-5001




















































































































Результаты поиска

Содержание PDK-5001

Отзывы:

Похожие инструкции для PDK-5001

Бренды по названию

Популярные бренды

Pioneer PDK-5001, Техническое руководство

Результаты поиска

Содержание PDK-5001

Отзывы:

Похожие инструкции для PDK-5001

Бренды по названию

Популярные бренды