Pioneer NextWindow DVD-V7300D, Руководство по эксплуатации

Страница: 64 / 96

64
En
Example 7) Inputting a command to jump to another
group.
To change a previously input “GO TO GROUP” command
group number, press
RECALL
during Detailed or List display, and
input the new number.
Using this command enables consecutive jumping to different
groups.
< Conceptual representation >
You can also create standby display groups. If you do this,
you return to the standby display after jumping to another
group.
< Conceptual representation >
DVD .
Setting the Subtitle, Audio
and Angle
SUBTITLE
÷
“00” turns the screen color to the color specified in “Back-
ground color” in the GUI menu and makes the played image
invisible.
÷
“01” to “32” displays the corresponding subtitle.
÷
“33” plays with Subtitle OFF.
÷
“34” is used to make the played image made invisible with
“00” visible again.
÷
“99” retains the previous condition. This is used to change
other setting than SUBTITLE while maintaining the SUBTI-
TLE setting the same.
÷
“35” to “98” are invalid.
AUDIO
÷
“0” plays image with Audio OFF.
÷
“1” to “8” selects and plays the corresponding audio.
÷
“9” retains the previous condition.
ANGLE
÷
“1” to “8” selects and plays the corresponding angle.
÷
“9” retains the previous condition.
÷
“0” selects and plays Angle 9.
NOTE
÷
When “retain the previous condition” is selected, “
✽
” is dis-
played in the input screen.
÷
The barcode/command stack cannot be executed if a value
that does not exist in the disc is input.
DVD .
To use only the chapter
search or frame search
In item “MARK CHAPTER” or “MARK FRAME”, simply press
NEXT
without setting anything.
A still image is displayed after search.
DVD .
To change a value
during input
Press the numeric button of the correct number (including 0).
To return to a previous setting point, press
PREV
.
DVD .
To cancel input in the middle
Move the
‰
(pointer) to “EXIT” by pressing the cursor button
(right direction) and press
ENTER
.
1. When the TITLE number
is flashing, press
RECALL
.
2. The display changes to
that indicated in the fig-
ure on the left. Input the
number of the group you
want to jump to, and
press
NEXT
.
GO TO GROUP - 002
*
*
*
*
GROUP - 001
GO TO GROUP - 004
*
*
*
*
GROUP - 002
GO TO GROUP - 010
*
*
*
*
GROUP - 004
REPEAT
*
*
*
*
GROUP - 001
GO TO GROUP - 001
GROUP - 002
*
*
*
*
GO TO GROUP - 001
*
*
*
*
GROUP - 004
GO TO GROUP - 001
*
*
*
*
GROUP - 003
example
RECALL 002 + PLAY
or
External option switch
Group 002
example
RECALL 003 + PLAY
or
External option switch
Group 003
example
RECALL 004 + PLAY
or
External option switch
Group 004
Jump
Barcode/Command stack setting
BC/COMMAND STACK GROUP 004: 003
GO TO GROUP - 000