Pioneer MVH-P7300, Руководство по эксплуатации

Страница: 45 / 188

Selecting a channel (step by step)
1
Push M.C. left or right.
!
If you push and hold M.C. left or right, you
can increase or decrease the channel number
continuously.
!
You can also perform tuning from a desired
channel category. (Refer to
Selecting a chan-
nel from a channel category on the next page.)
Displaying the Radio ID
1
Push M.C. left or right to select CH 000 .
!
To select CH 000 , set the channel select setting to
All CH . About the channel select setting, refer to
Channel Mode (channel select mode setting) on
this page.
Notes
!
Play time and scrubber bar are displayed dur-
ing the Instant Replay mode. Refer to
Using
the Instant Replay function on the next page.
!
Play time display indicates the time inverted
from the live broadcast. The play time is dis-
played as a negative number.
!
It may take a few seconds before you can hear
anything while this unit acquires and pro-
cesses the satellite signal when you change
the source to a SIRIUS tuner or select a chan-
nel.
Storing and recalling stations
Operations are basically the same as those of
the tuner. (Refer to
Storing and recalling sta-
tions for each band on page 15.)
However, the band selection method is differ-
ent from that of the tuner.
Selecting a band
1
Push M.C. down.
Band can be selected from SIRIUS1 , SIRIUS2 or
SIRIUS3 .
Selecting a SIRIUS channel directly
Operations are the same as those of the XM
tuner. (Refer to
Selecting an XM channel directly
on page 43.)
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select Function.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Channel Mode (channel select mode setting)
You have two methods for selecting a channel: by
number and by category. When selecting by number,
channels in any category can be selected. Select by
category to narrow your search down to only chan-
nels in a particular category.
Refer to
Channel Mode (channel select mode setting)
on the previous page.
Game Alert (game alert setting)
This system can alert you when games involving your
favorite teams are about to start. To use this function
you need to set up a game alert for the teams in ad-
vance.
!
To use this function, a Pioneer SIRIUS bus inter-
face (e.g. CD-SB10) is required.
!
To use this function, a SIRIUS plug-and-play unit
with a Game Alert Function is required.
!
For details, refer to the SIRIUS plug-and-play
unit
’
s manuals.
!
You can also operate this function when a SIR-
PNR2 is connected to this unit.
!
The Game Alert function is on at the default set-
ting.
!
Once you select the teams, you need to turn the
Game Alert function on.
1
Press
M.C.
to turn the Game Alert on or off.
!
When a game of the selected team is about to
start (or is currently playing) on a different station,
a game alert is displayed.
Use
M.C. to select Jump and switch to the other
station to listen to the game.
Turn to change the menu option. Press to select.
If you select
Stay
, the station will not be switched.
Team Setting
(team setting)
En
45
English
Section
05
Available accessories