Pioneer MCS-333, Руководство по эксплуатации

Страница: 88 / 576

Troubleshooting 88
En
T
roubleshooting
9
Others
Problem Check Remedy
Power does not
turned on. Is the power cord properly
connected?
y
Plug the power cord securely into the power outlet.
y
Unplug the power cord, wait several seconds, then plug the power
cord back in.
The player’s power turns
off automatically. Is
Auto Power Off
set to
10 min/20 min/30 min
?
If
Auto Power Off
is set to
10 min/20 min/30 min
, the player’s power
automatically turns off if no operation is performed for the set amount
of time (page 76).
Is
Control
set to
On
? The player’s power may turn off together with the power of the TV
connected to the
HDMI OUT
terminal. If you do not want the player’s
power to turn off when the TV’s power is turned off, set
Control
to
Off
(page 74).
The player’s power turns
on automatically. Is
Control
set to
On
? The player’s power may turn on together with the power of the TV
connected to the
HDMI OUT
terminal. If you do not want the player’s
power to turn on when the TV’s power is turned on, set
Control
to
Off
(page 74).
Cannot be operated with
the remote control. Are you operating the remote
control from a point too far
away from the player? Operate from within 7 m of the remote control sensor.
Are the batteries dead? Replace the batteries (page 10).
Settings I have made have
been cleared. y Have you disconnected the
power cord while the player’s
power was on?
y
Has there been a power
failure?
Always press
1
STANDBY/ON
on the player’s front panel or
1
STANDBY/
ON
RQWKHUHPRWHFRQWUROFKHFNWKDW32:(52))KDVWXUQHGRIIIURP
the player’s front panel display and wait for more than 10 seconds before
disconnecting the power cord. Be particularly careful when the power
cord is connected to the AC outlet on another device because the player
turns off in conjunction with the device.
USB (external storage)
device does not work with
this player properly. Is the USB device properly
connected?
y
Turn the player’s power off, then turn the power back on.
y
Turn the player’s power off, then reconnect the external storage device
(page 44).
Is the USB device connected
via an extension cable? Do not use an extension cable. The player may not work properly with it.
Is the external storage device
connected to the USB port via
a memory card reader or
USB
hub?
External storage device may not work if connected to the
USB
port via a
memory card reader or USB hub.
Does the external storage
device contain multiple
partitions? External storage devices may not be recognized if they contain multiple
partitions.
Is the external storage device
write-protected? Turn the player’s power off, then disable the write-protection.
Is the external storage device’s
file system FAT16, FAT32 or
NTFS? Only external storage devices with a FAT16, FAT32 or NTFS file system
can be used.
Some external storage devices may not operate.
Cannot record to a USB
device. A USB device is not connected
to the USB port on the rear of
the unit. You cannot use the USB port on the front of the unit to record.
There is not enough free
memory in the USB device. Please check to make sure that there is enough free memory in the
USB device.
The USB device format is not
set correctly. Please set the USB device to the correct format.
Display window is dark. Press the
DIMMER
on the remote and select the desired display
brightness.
“OC ERROR” is displayed
on the unit’s display
window. Unplug the unit and contact the Pioneer Customer Support Center.