Pioneer krp-m01, Руководство по обслуживанию

Страница: 46 / 131

46
KRP-M01
1 2 3 4
A
B
C
D
E
F
1 2 3 4
[Common to the DTVs 1 and 2]
How to Display the DTB Service Menu
As you can display the DTB Service Menu from Factory mode, you should have a remote control unit that supports Factory
mode.
Step 1: Press the FACTORY key on the remote control unit to display the I
N FORMATIO N screen in Factory mode.
Step 2: Press the MUTI N G key on the remote control unit 4 times to display the I N ITIALIZE screen.
Step 3: Press the
j
key on the remote control unit twice so that DTB SER V ICE MODE (+) is displayed at the bottom of the
screen.
Step 4: Press the E
N TER/SET key on the remote control so that MODE SHIFT <=> : N o is displayed at the bottom of the
screen.
Step 5: Press the
k
or
l
key on the remote control so that MODE SHIFT <=> :YES is displayed at the bottom of the screen.
Step 6: Press the E N TER/SET key on the remote control unit for 5 sec or more to display the DTB Service Menu.
How to Chan g e the LNB Volta g e on the DTV Service Menu
Top page of the DTB Service Menu
Digital : Service menu for digital terrestrial broadcast reception
Satellite : Service menu for digital satellite broadcast reception
On the Satellite screen of the DT V Service menu below, move the cursor to L N B PO W ER by using the
j
key
on the remote control unit then change the L N B voltage, using the
k
or
l
key.
The L N B voltage values are as shown below:
V : 13 V (Typ.)
H: 18 V (Typ.)
V up: V +1 V
Hup: H+1 V