Button DisplayIndicator
Position
a
FRONT
Front seats
b
ALL
All seats
c
FRONT-L
Front seat left
d
FRONT-R
Front seat
right
1 Press DSP to select the position selec-
tor.
Press
DSP
until
POSI
appears in the display.
#
If the position selector has been previously set
to a listening position then the title of that pre-
viously selected listening position will be dis-
played instead of
POSI
.
2 Press
c
/
d
/
a
/
b
to select a listening po-
sition.
Press one of these,
c
/
d
/
a
/
b
, to select a lis-
tening position as listed in the table.
#
To cancel the selected listening position,
press the same button again.
Using automatic sound
levelizer
During driving, noise in the car changes ac-
cording to the driving speed and road condi-
tions. The automatic sound levelizer (ASL)
monitors such varying noise and automati-
cally increases the volume level, if this noise
becomes greater. The sensitivity (variation of
volume level to noise level) of ASL can be set
to one of five levels.
1 Press DSP to select ASL.
Press
DSP
until
ASL
appears in the display.
2 Press
a
to turn ASLon.
ASL: MID
appears in the display.
#
To turn ASL off, press
b
.
3 Press
c
or
d
to select the desired ASL
level.
Each press of
c
or
d
selects ASL level in the
following order:
LOW
(low)
MID-L
(mid-low)
MID
(mid)
MID-H
(mid-high)
HIGH
(high)
Digital Signal Processor
En
35
English
Section
09
